Promise Technology FastTrak TX4650 User Manual page 112

FastTrak TX4650, TX2650 User Manual
The information tab displays the following information:
• Enclosure Type – The manufacturer's model name or number.
• Fan Speed – The RPM of the enclosure's cooling fans.
• Temperature – The internal temperature of the enclosure. Each reading
reflects a separate measurement.
• Power Status – The voltages supplied by the enclosure's 12V and 5V
systems.
The Fan, Temperature and Power icons change color when an error is
indicated, as shown below.
State
Green
Blinking
Amber
Red
Dark
An incident refers to one occurrence of out-of-range voltage, temperature or fan
speed. Any incident requires immediate attention.
For more information on Enclosures, replacing physical drives and other repair
operations, refer to the SuperSwap User Manual.
Fan Error Temperature Error
Status
Physical drive is
present and ready
n/a
Physical drive:
• is spinning up
• is critical
• is rebuilding
• reports a SMART
error
Physical drive:
• is offline
• is not installed
Power is off
Power Error
LEDs
Activity
Physical drive is
present and ready
Read/write activity
n/a
n/a
Physical drive:
• has failed
• is not installed
106
Enclosure
Normal status
n/a
1 incident
(see below)
Enclosure is critical
but still functional
Attention required
2 or more incidents
(see below)
Physical drives are
spinning up