Table of Contents
Advertisement
FastTrak TX4650, TX2650 User Manual
Creating Your Logical Drive
You will now use the onboard FastBuild BIOS utility to create a logical drive with
the attached drives.
For an explanation of the logical drive concepts, see Chapter 6
1. Boot your system. If this is the first time you have booted with the FastTrak
card and drives installed, the Promise onboard BIOS will display the
following screen (below).
2. Press the Ctrl-F keys to display the FastBuild Utility Main Menu (below).
3. Press 2 on the Main Menu screen to display the Define LD Menu (below).
You can omit this step, proceed with the WebPAM installation on
page 16, then create your logical drive using WebPAM. See
"Creating a Logical Drive" on page 80.
Note
12
- Quick Links:
- Fasttrak Tx2650
- Fasttrak Tx4650
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the FastTrak TX4650 and is the answer not in the manual?