In this example, there were four physical drives connected to the FastTrak
Controller. Notice that there is no drive reported on Port 2. The failed drive is
connected to Port 2.
Replace the Failed Physical Drive
Replace the failed physical drive with a new one of equal or greater capacity.
Then rebuild the logical drive. See "Connecting the FastTrak Card" on page 10
and the SuperSwap User Manual for more information about replacing a physical
drive.
Rebuild Your Logical Drive
1.
Click the Logical Drive View
2.
Click the Logical Drive
3.
Click the Rebuild tab in Management View.
icon in Tree View.
icon of the logical drive you want to rebuild.
103
Chapter 5: WebPAM
No drive on Port 2