Promise Technology FastTrak TX4650 User Manual page 150

FastTrak TX4650, TX2650 User Manual
Step 3: Install the Software Drivers
Windows Vista, Server 2003, XP, and 2000
1. Do one of the following actions:
• Insert the FastTrak Driver diskette in the A: drive.
• Attach the FastTrak Driver memory stick to your USB port.
2. In the Start Menu, go to Settings > Control Panel. Double-click the System
icon. click the Hardware tab. click the Device Manager button.
3. At the Device Manager, click the + icon to the left of SCSI and RAID
Controllers to expand the list.
On Windows Vista click the + icon to the left of Storage controllers to expand
the list.
4. Right-click Promise FastTrak TX [4650, 2650] (tm) Controller and choose
Update Driver...
5. In the Hardware Update Wizard, choose No, not this time and click Next.
6. In the Hardware Update Wizard, choose Install from a list or specific location
(Advanced) and click Next.
7. Under Please choose your search and installation options, choose Don't
search. I will choose the driver to install and click Next.
8. Under Select the device driver you want to install, click Have Disk...
9. Under Install from Disk, type A:\ for the diskette or the appropriate letter for
the USB memory stick and click OK.
10. Under Select the device driver you want to install, click Next.
If a warning about Digital Signature appears, click Continue Anyway.
11. Under Completing the Hardware Update Wizard, click Finish.
12. Click Yes to restart your PC.
13. Remove the FastTrak Driver diskette or memory stick.
144