Accessories; Appendix Overview; U3-Clp: Side-Mounting Clip; Figure C.1 U3-Clp Mounting Hole Locations - Intelligent Motion Systems IM805 Operating Instructions Manual

A p p e n d i x C
A p p e n d i x O v e r v i e w
This appendix discusses in detail the optional accessories avalaible for
use with the IM805. These accessories are:
U 3 - C L P : S i d e - M o u n t i n g C l i p
The U3-CLP mounting clips were specially designed for the IM805, IM483
series of Microstepping drivers and driver indexers and the ISP200 and
ISP300 series power supplies to decrease overall panel space and allow
for more flexible mounting patterns.
The 2 clips attach easily to the unit for optional side mounting and re-
duce the amount of panel space required to mount the drive by 42%. The
low-profile clips attach to the side of the unit and do not interfere with
various connection configurations.
I n c l u d e d i n t h e K i t
R e c o m m e n d e d H a r d w a r e ( N o t I n c l u d e d )
2 - 10 X 32 Pan Head Machine Screw (Length determined by mounting
plate thickness)
66 IM805 Operating Instructions Revision R032306
U3-CLP - Side-mounting clip set for all versions of the
n
IM805.
BB-34-4P - Breakout board for the -34P1 connection option.
n
n PLG-R - Pluggable screw terminal set for use with the -PLG
connection option.
Figure C.1: U3-CLP Mounting Hole Locations
(1) IMS0063 Top Clip
(1) IMS0064 Bottom Clip
A c c e s s o r i e s
3.36
(85.34)
0.50
(12.7)