Table of Contents
Advertisement
Stop & Go
When Stop & Go is activated, the power
of all cooking zones in use is reduced to
power level 1. The power level of the
extractor is not reduced. Depending on
the power level set for the cooktop, it
may even increase.
The settings for the cooking zones and
the timer settings cannot be changed,
the cooktop can only be switched off.
The minute minder, switch-off, Booster
and Auto heat-up times continue to run.
When Stop & Go is deactivated, the
cooking zones will operate at the power
level previously selected.
If the function is not deactivated within
1 hour, the cooktop will switch off.
Activating / Deactivating
Touch the sensor.
Use this function if there is a danger of
food boiling over.
Additional functions
Recall
If the cooktop is switched off
inadvertently during operation, this
function can be used to reset all
settings. For this to work, the cooktop
must be switched on again within
10 seconds of being switched off.
Switch the cooktop on again.
The previously set power levels will
flash.
Press one of the flashing power level
indicators immediately.
All the cooking zones and the timer will
continue to operate using the settings
selected previously.
39
Hide quick links:
Advertisement
Table of Contents
