Table of Contents
Advertisement
Problem
After the cooktop has
been switched on or a
sensor has been
touched, appears in
the timer display for a
few seconds.
The cooktop has
switched off
automatically. When the
cooktop is switched
back on, an appears
above the On/Off
sensor .
After the cooktop has
been switched on,
appears in the timer
display for a few
seconds. The cooking
zones do not heat up.
A cooking zone
switches itself off
automatically.
A cooking zone or the
whole cooktop switches
off automatically.
The Booster has
automatically switched
off early.
The cooking zone is not
working in the usual
way on the power level
selected.
Possible cause and remedy
The system lock or safety lock is activated.
Deactivate the system lock or safety lock (see
"System lock / Safety lock").
One or several of the sensors are covered, for
example, by finger contact, food boiling over or by an
object such as an oven glove or tea towel.
Clean off any dirt or remove the object (see
"Safety switch-off").
The cooktop is in Demonstration mode.
Touch the and sensors at the same time until
flashes alternately with in the timer display.
A cooking zone might have been operated for too
long.
You can use the cooking zone again by switching
it back on (see "Safety switch-off").
The overheating protection mechanism has been
activated.
See "Overheating protection".
The overheating protection mechanism has been
activated.
See "Overheating protection".
The overheating protection mechanism has been
activated.
See "Overheating protection".
Problem solving guide
53
Hide quick links:
Advertisement
Table of Contents
