Table of Contents
Advertisement
Cleaning and care
Extractor drip tray
Clean the drip tray if liquid from food
being spilled or boiling over has got into
the extractor.
Remove and clean the grease filter as
described in the "Grease filter"
section.
Hold the drip tray securely and open
the 4 catches (2 on the right and 2 on
the left). Carefully remove the tray
from the casing, making sure it is
kept horizontal.
Pour out the liquid.
Clean and dry the drip tray.
Also clean and dry accessible areas
inside the extractor.
Fasten the drip tray back onto the
casing.
Refit the grease filter and the
extraction grille.
50
Grease filter / Extraction grille
The extraction grille and the reusable
metal grease filter collect solid matter
from kitchen vapours (grease, dust etc.)
and therefore prevent soiling of the
extractor. The grease filter must be
cleaned after 30 hours of use. The
sensor will light up.
An oversaturated filter is a fire
hazard.
Clean the grease filter regularly.
Removing the grease filter
Lift up the extraction grille.
Carefully remove the grease filter.
Ensure that you do not tilt the grease
filter.
Pour out any liquid which has
collected at the bottom of the grease
filter.
Hide quick links:
Advertisement
Table of Contents
