Stop&Go
When Stop&Go is activated, the power
of all cooking zones in use is reduced to
power level 1.
The cooking zone power levels and the
timer settings cannot be altered and the
hob can only be switched off. A set
minute minder time, Booster time, Auto
heat-up and automatic switch-off times
set will be put on hold.
When Stop&Go is deactivated, the
cooking zones will operate at the power
level previously selected and all the
times will resume running.
If the function is not deactivated within
10 minutes, the hob will switch off.
Activating / Deactivating
Touch the sensor.
Use this function when the sensors
need to be cleaned quickly or there is a
risk of boiling over.
Additional functions
Recall
If the hob is switched off in error during
operation, this function can be used to
restore all settings. For this to work, the
hob must be switched on again within
6 seconds of being switched off.
Switch the hob on again.
Touch the sensor control immedi-
ately (within 6 seconds) after the hob
is switched back on.
33