Table of Contents
Advertisement
Installation of surface-
mounted cooktops
Create the worktop cut-out.
Remember to maintain the minimum
safety distances (see "Safety
distances").
Seal the cut surfaces of wooden
worktops with a suitable heat-
resistant sealant to avoid swelling
caused by moisture. The sealant
must be temperature-resistant.
Make sure the sealant does not
come into contact with the top
surface of the worktop.
Attach the sealing strip provided
underneath the edge of the cooktop.
Feed the mains connection cable
down through the cut-out.
Place the cooktop centrally in the
cut-out. When doing this make sure
that the seal of the appliance sits
flush with the worktop on all sides.
This is important to ensure an
effective seal all round.
Do not use any additional sealant
(e.g. silicone).
If the seal does not meet the worktop
correctly on the corners, the corner
radius (≤ R4) can be carefully scribed
to suit.
Connect the cooktop to the mains
electricity supply.
Check that the cooktop works.
Installation
79
Hide quick links:
Advertisement
Table of Contents
