Table of Contents
Advertisement
Stop & Go
When Stop & Go is activated, all power
levels are reduced to 1.
The power levels and the timer settings
cannot be altered; the hob can only be
switched off. The minute minder,
switch-off, Booster and AutoBoost
times continue to run.
When the function is deactivated, the
appliance switches back to the power
level that was set last.
If the function is not deactivated within
1 hour, the hob will switch off.
Activating/Deactivating
Touch the sensor control.
Use this function if there is a danger of
food boiling over.
Additional functions
Recall
If the hob is switched off by mistake
during use, this function can be used to
reset all settings. For this to work, the
hob must be switched on again within
10 seconds of being switched off.
Switch the hob on again.
The previously set power levels flash.
Press one of the flashing power level
indicators immediately.
All settings are restored.
39
Advertisement
Table of Contents
