Additional Functions; Stop & Go; Recall - Miele KM 7564 FR Operating And Installation Instructions

Hide thumbs Also See for KM 7564 FR:
Table of Contents

Advertisement

Additional functions

Stop & Go
When Stop & Go is activated, the power
of all cooking zones in use is reduced to
power level 1.
The cooking zone power levels and the
timer settings cannot be altered; the
hob can only be switched off. The
minute minder, switch-off, Booster and
heat-up times continue to run.
When Stop & Go is deactivated, the
cooking zones will operate at the power
level previously selected.
If the function is not deactivated within
1 hour, the hob will switch off.
Activating/Deactivating
 Touch the  sensor control.
Use this function if there is a danger of
food boiling over.
52

Recall

If the hob is switched off in error during
operation, this function can be used to
reset all settings. For this to work, the
hob must be switched on again within
10 seconds of being switched off.
 Switch the hob on again.
The previously set power level flashes.
 Touch one of the flashing power
levels immediately.
All the cooking zones and the timer will
continue to operate using the settings
selected previously.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents