Table of Contents
Advertisement
Stop & Go
When Stop & Go is activated, the power
of all cooking zones in use is reduced to
power level 1. The power level of the
vapour extraction is not reduced. De-
pending on the power level set for the
cooking zones, it may even increase.
The cooking zone power levels and the
timer settings cannot be altered; the
hob can only be switched off. The
minute minder, switch-off, Booster and
heat-up times continue to run.
When Stop & Go is deactivated, the
cooking zones will operate at the power
level previously selected.
If the function is not deactivated within
1 hour, the hob will switch off.
Activating
Touch the sensor control.
Touch the sensor control.
Deactivating
Touch the sensor control.
Use this function if there is a danger of
food boiling over.
Additional functions
Recall
If the hob is switched off by mistake
during use, this function can be used to
reset all settings. For this to work, the
hob must be switched on again within
10 seconds of being switched off.
Switch the hob on again.
Immediately after switching the hob
on, touch one of the flashing cooking
zone displays.
49
Hide quick links:
Advertisement
Table of Contents
