Table of Contents
Advertisement
Additional functions
Wipe protection
The cooktop sensors can be locked
for 20 seconds in order, for example,
to remove soiling. The sensor
control is not locked.
Activating
Touch the sensor.
The time counts down in the timer
display.
Deactivating
Touch the sensor control until the
timer display goes out.
Demonstration mode
This function enables the cooktop to be
demonstrated in showrooms without
heating up.
Activating / Deactivating
Switch the cooktop on.
Touch the 0 sensor control on any of
the numerical keybanks.
Then touch the 0 and 2 sensors at
the same time for 6 seconds.
In the timer display, flashes
alternately with (demonstration mode
activated) or (demonstration mode
deactivated) for a few seconds.
40
Displaying cooktop data
The model designation and software
version can be displayed. There must
not be any pots or pans on the
cooktop.
Model designation
Switch the cooktop on.
Touch the 0 sensor control on any of
the numerical keybanks.
Then touch the 0 and 4 sensor
controls at the same time.
The timer display shows 2 numbers
flashing alternately:
Example: flashing alternately with
= KM 1234
Software version
Switch the cooktop on.
Touch the 0 sensor control on any of
the numerical keybanks.
Then touch the 0 and 3 sensor
controls at the same time.
Numbers will appear in the timer
display:
Example: : = Software version 2.00
Hide quick links:
Advertisement
Table of Contents
