Adjusting Toner Darkness - Lexmark MB2442adwe User Manual

Troubleshooting
Action
Step 4
a
Turn off the printer, wait for about 10 seconds, and then turn on
the printer.
b
Print the document.
Is the document printed?
Step 5
a
Remove, and then reinstall the print driver.
b
Print the document.
Is the document printed?

Adjusting toner darkness

1
From the control panel, navigate to:
Settings > Print > Quality > Toner Darkness
For non-touch-screen printer models, press
2
Adjust the setting.
3
Apply the changes.
The printer is not responding
Action
Step 1
Connect the power cord to the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or
electrical shock, connect the power cord to an appropriately
rated and properly grounded electrical outlet that is near the
product and easily accessible.
Is the printer responding?
Step 2
Check if the electrical outlet is turned off by a switch or breaker.
Is the electrical outlet turned off by a switch or breaker?
Step 3
Check if the printer is on.
Is the printer on?
Yes
The problem is
solved.
The problem is
solved.
to navigate through the settings.
Yes
The problem is
solved.
Turn on the switch or
reset the breaker.
Go to step 4.
208
No
Go to step 5.
Contact customer
support.
No
Go to step 2.
Go to step 3.
Turn on the printer.