Unpacking And Removing Packing Materials; Stacking Mini Washer - LG WTP2071 series Owner's Manual

Unpacking and Removing
Packing Materials
1
Lift the appliance off the foam base.
• If you must lay the appliance down to
remove the carton base, always protect the
side of the appliance and lay it carefully on
its side. Do not lay the appliance on its front
or back.
2
Pull and save the foam block for future use.
• If the washing machine must be moved in
the future, the foam block will help prevent
damage to the washing machine during
transportation.
NOTE
• To prevent damage, do not remove the foam
block until the washing machine is ready for
assembly with the Main washer.
3
Rotate the top cover 180 degrees.
• Cover the upper hole with the top cover and
install 4 short screws (included in packing
box) to fix it in place.
Short screws
WARNING
• The plastic top cover must be secured to
avoid the risk of electric shock or short circuit
from water drops. Failure to do so can cause
serious injury, fire, electric shock or death.
12

Stacking Mini Washer

1
2
3
Top cover
Make sure the leveling feet on the Main
front-loading washing machine are fully
wound in before stacking. Place the Main
front-loading washing machine on top of the
Mini Washer. Make sure the legs of the Main
top of this Mini Washer align with the holes in
the front-loading washing machine.
Stacking holes
Stacking holes
Install 4 long screws (included in box) on
each side to securely attach the front-loading
washing machine to the Mini Washer.
Long screws
Adjust the feet of top main front-loading
washing machine slightly until they gently
seat up against the Mini Washer.
EN