Leveling The Appliance - LG WTP2071 series Owner's Manual

Mini washer
Table of Contents

Advertisement

Leveling the Appliance

If the floor is uneven, turn the adjustable feet
of the Mini Washer as required (Do not insert
pieces of wood etc. under the feet). Make
sure that all four feet are stable and resting on
the floor and then check that the appliance is
perfectly level (Use a spirit level).
• Once the appliance is level, tighten the lock
nuts up towards the base of the appliance. All
lock nuts must be tightened.
Raise
Lock nut
Diagonal Check
• When pushing down on the edges of the
top plate diagonally, the appliance should
not move up and down at all (check both
directions). If the appliance rocks when
pushing the machine top plate diagonally,
adjust the necessary foot or feet again.
WARNING
• After stacking Main front-loading washing
machine on to the Mini Washer, use the
leveling feet on Mini Washer to level both. The
main front-loading washing machine´s leveling
feet should already be firmly snug against
the Mini Washer and the locknuts turned
counterclockwise to secure them.
NOTE
• Timber or suspended type flooring will
contribute to excessive vibration and
unbalance.
Lower
Tighten all 4
lock nuts securely
Using Anti-Slip Sheets (Optional)
If you install the appliance on a slippery surface,
it may move because of excessive vibration.
Incorrect leveling may cause malfunction
through noise and vibration. If this occurs, install
the anti-slip sheets under the leveling feet and
adjust the level.
1
Clean the floor to attach the anti-slip sheets.
• Use a dry rag to remove and clean foreign
objects and moisture. If moisture remains,
the anti-slip sheets may slip.
2
Adjust the level after placing the appliance in
the installation area.
3
Place the adhesive side of the anti-slip
sheets on the floor.
• It is most effective to install the anti-slip
sheets under the front feet. If it is difficult to
place the pads under the front feet, place
them under the back feet.
4
Ensure the appliance is level.
• Push or rock the top edges of the appliance
gently to make sure that the appliance does
not rock. If the appliance rocks, level the
appliance again.
NOTE
• You can obtain anti-slip sheets from an LG
Service Centre or a Hardware store.
This side up
Adhesive side
EN
17

Advertisement

Table of Contents
loading

Table of Contents