Table of Contents
Advertisement
Symptoms
Washing machine
will not drain water
Poor stain removal
Wash cycle time is
longer than usual
Musty or mildewy
odor in washing
machine
Washing machine
chimes repeatedly
before final rinse
36
Reason
Kinked drain hose.
Drain located higher than 100
cm above the floor.
Normal and heavily soiled
load.
Previously set stains.
The washing machine
automatically adjusts the
wash time for the amount of
laundry, water pressure and
other operating conditions.
Incorrect or too much
detergent has been used.
Inside of drum was not
cleaned properly.
This is not an error.
Solution
• Ensure that the drain hose is not kinked.
• Make sure that the drain hose is no higher
than 100 cm above the bottom of the
washing machine and is no more than 1.5
m away from the washing machine.
• Use the main washing machine to wash
normal and heavily soiled loads.
• Articles that have previously been washed
may have stains that have been set.
These stains may be difficult to remove
and may require hand washing or pre-
treating to aid in stain removal.
• This is normal. The washing machine
adjusts cycle time automatically to
provide optimal results for the selected
programme. The time remaining shown
in the display is only an estimate. Actual
time may vary.
• This machine requires very little
detergent. Use the provided detergent
measuring cup.
• Run the Tub clean programme regularly.
• This is an alert to allow the addition of
liquid fabric softener before the final rinse.
EN
Advertisement
Table of Contents
