LG WTP2071 series Owner's Manual page 33

Mini washer
Table of Contents

Advertisement

Symptoms
Water leaking
Wrinkling
Water leaks
Reason
Supply hose connection is
loose at the tap, washing
machine, or drain hose
connector.
House drain pipes are
clogged.
Drain hose has come out
of drain connector or is not
inserted far enough.
Load is too large for the
drum.
Washing machine not
unloaded promptly.
Washing machine overloaded.
Oversudsing of detergent.
Solution
• Check hoses and drain hose connectors
for leaks, cracks and splits.
• Tighten hose connections.
• The washing machine pumps out water
very rapidly. Check for water backing up
out of the drain pipe during drain. If water
is seen coming out of the drain, check for
proper drain hose installation and check
for restrictions in the drain. Contact a
plumber to repair drain pipe.
• Tie drain hose to supply hose or
standpipe to prevent it from coming out
during drain. For smaller drain pipes,
insert the drain hose into the pipe as far
as the drain hose flange. For larger drain
pipes, insert the drain hose into the pipe
2-5 cm past the flange.
• Reduce the load or use the front-loading
washing machine.
• Stop the washing machine and check the
load. Make sure the load fits loosely in the
drum and the door closes easily.
• Always remove items from the washing
machine as soon as the cycle is complete.
• The washing machine can be fully loaded,
but the drum should not be tightly packed
with items. The door of the washing
machine should close easily.
• Oversudsing may create leaks, and
may be caused by the type and amount
of detergent used. Always reduce the
amount of detergent if the load is small, or
if your water is very soft. Never use more
than the maximum amount shown in the
dispenser provided.
EN
33

Advertisement

Table of Contents
loading

Table of Contents