Table of Contents
Advertisement
Unpacking and Removing
Packing Materials
1
Lift the appliance off the foam base.
• If you must lay the appliance down to remove
the carton base, always protect the side of the
appliance and lay it carefully on its side. Do
not lay the appliance on its front or back.
2
Pull and save the foam block for future use.
• If the washing machine must be moved in
the future, the foam block will help prevent
damage to the washing machine during
transportation.
NOTE
• To prevent damage, do not remove the foam block
until the washing machine is at the final location.
3
Turn the top cover about 180 degrees.
• Cover the upper hole with the top cover and
install 4 short screws (included in packing box)
to fix it in place.
Short screws
WARNING
• The top cover must be installed to avoid the risk
of electric shock or short circuit from water drops.
Failure to do so can cause serious injury, fire,
electric shock or death.
Stacking the Pedestal Washing
Machine
1
2
3
Top cover
• This pedestal washing machine must be installed
underneath a matching LG front-loading washing
machine manufactured after 2009. (16-21 kg
washing machine only)
• The pedestal washing machine will not work as a
standalone unit.
• The pedestal washing machine must be stacked
under an LG front-loading washing machine in
order to operate properly.
Make sure the leveling feet on the front-loading
washing machine are fully retracted before
stacking. Place the front-loading washing
machine on top of the pedestal washing
machine. Make sure the holes on the pedestal
washing machine align with the holes in the
front-loading washing machine.
Stacking holes
Stacking holes
Install 4 long screws (included in box) at each
corner to securely attach the front-loading
washing machine to the pedestal washing
machine.
Long screws
Turn the feet of the front-loading washing
machine slightly until it is snugged up against the
pedestal washing machine.
WARNING
EN
11
Advertisement
Table of Contents
