Gill GMX100 User Manual page 40

Gill Instruments Ltd
_____________________________________________________________________________________________________________
GMX101 Full Data String
Node, Solar Radiation, Sunshine Hours, Sunrise Time, Solar Noon Time, Sunset Time, Position of the Sun,
Twilight (Civil), Twilight (Nautical), Twilight (Astronomical), X-Tilt, Y-Tilt, Z-Orientation, User Information
Field, System Date and Time, Supply Voltage, Status, Checksum
┐Q,0001,01.20,07:54,12:10,16:25,174:+18,17:03,17:45,18:24,+32,-17,+1,2017-01-
20T11:46:01.3,+05.0,0000,└ 51
GMX200 Factory Default Data String
Items in red relate to the GPS option unit.
NODE, DIR, SPEED, CDIR,
┐Q,021,000.01,090,000.01,+50.763004:-001.539898:+3.10,2015-06-05T10:19:30.8, +05.1,0000,└ 36
Where:-
┐
Q
021
000.01
090
000.01
+50.763004
-001.539898
+3.10
2015-06-05
T10:19:30.8
+05.1
0000
└
36
NOTES: <STX> is the Start of String character (ASCII value 2).
<ETX> is the End of String character (ASCII value 3).
Checksum, the 2 digit Hex Checksum sum figure is calculated from the Exclusive OR of the
bytes between (and not including) the STX and ETX characters.
MetSet Settings Summary
REPORT : NODE DIR SPEED CDIR
PROTOCOL : GILL
COMMS : RS232
BAUD : 19200
NODE : Q
OUTFREQ : 1HZ
MSGMODE : CONT
ASCTERM : CRLF
__________________________________________________________________________________________________
MaxiMet
Doc. No. 1957-PS-021
CSPEED, GPSLOCATION, TIME, VOLT, STATUS, CHECK
STX
Node Letter
Wind Direction
Wind Speed
Corrected Direction
GPS Corrected Speed
GPS Latitude
GPS Longitude
GPS Height location
Date
Time
Supply Voltage
Status
ETX
Checksum
CSPEED GPSLOCATION
SENSOR COMPASS : ON
COMPASSDECL : +000.0
SENSOR GPS : ON
UNITS GPS : MS
TIME VOLT STATUS CHECK
POWER : 0
TIME : 2015-06-05T11:04:54
AUTOTIME : ON
TZOFFSET : +00.00
PUPMSG STATUS : ON
PUPMSG REPORT : ON
PUPMSG UNITS : ON
Page 40 Issue 3
May 2018