Gill GMX100 User Manual page 142

Gill Instruments Ltd
_____________________________________________________________________________________________________________
Location F ix and Number of Satell ites
GPSSTATUS -
Result e.g. 010B.
Where: 0 is padding.
1 is GPS SPS mode fix valid (0 is fix not available).
0B is a hexadecimal representation of the number of satellites acquired, 11 satellites found. 0A
would be 10 satellites etc.
TIME (and Date) - MaxiMe t D ate and Time (can be up dated by GP S
Option)
Time can be set manually by the user or updated by the GPS Module (if fitted). GPS time can be
automatically updated every hour (GPS default setting).
By default time will be UTC.
Result e.g. 2015-06-04T10:01:36.8.
Supply Voltage
VOLT -
DC Supply voltage measured at the MaxiMet.
Result e.g. +10.5 (volts).
STATUS - Status of MaxiMet Sensors
Outputs the MaxiMet Sensors Status Code.
Result e.g. 0000 (see para 8.3).
WINDSTAT - Status of Wind Sensor in de tail
Outputs status codes relating to wind sensor data.
Result e.g. 0000 (see para 8.3).
User Infor mation Fiel d
USERINF -
The User Information field shall have a maximum size of 16 characters, comprised of printable ASCII
characters (to exclude "@", ",", "*", "%" and "?").
Note: Space character may be included.
This field allows for instance to record installation or calibration dates.
Result e.g. CAL DUE 15.08.18
__________________________________________________________________________________________________
MaxiMet
Doc. No. 1957-PS-021
Page 142 Issue 3
May 2018