Gill GMX100 User Manual page 121

Gill Instruments Ltd
_____________________________________________________________________________________________________________
5. Tera Term opens at 9600 baud by default but MaxiMet uses 19200 as a default, so change Tera
Term baud rate setting to 19200.
a. Select Setup from the top menu.
b. Click on Serial Port from the drop down menu.
c. Change baud rate to 19200.
d. Click on OK.
Data will be output as follows:
__________________________________________________________________________________________________
MaxiMet
Doc. No. 1957-PS-021
Page 121 Issue 3
May 2018