Gill GMX100 User Manual page 104

Gill Instruments Ltd
_____________________________________________________________________________________________________________
A
OC
<CR><LF>
Immediately followed by:
$WIXDR,C,+023.9,C,TEMP,P,1.0243,B,PRESS,H,039,P,RH,Y,000.000,M,PRECIP*01<CR><LF>
Where: $WIXDR
C
+023.9
C
TEMP
P
1.0243
B
PRESS
H
039
P
RH
Y
000.000
M
PRECIP
*01
<CR><LF>
Followed by GPS data if option available:
$GPGGA,161229.487,3723.2475,N,12158.3416,W,1,07,1.0,9.0,M, , , ,0000*18<CR><LF>
Where: $GPGGA
161229.487
3723.2475
N
12158.3416
W
1
07
1.0
9.0
M
, ,
0000
*18
<CR><LF>
__________________________________________________________________________________________________
MaxiMet
Doc. No. 1957-PS-021
Acceptable measurement (V is a void fail measurement)
Hex Checksum
End of message termination
Wind Instrument Transducer
Type of Sensor (Temperature)
Temperature Reading
Temperature Reading in Degrees Centigrade
Name of Temperature Sensor
Type of Sensor (Pressure)
Pressure Reading in Bars
Pressure Units of Measure (Bars)
Name of Pressure Sensor
Type of Sensor (Humidity)
Humidity Reading in Percent
Humidity Units of Measure (Percent)
Name of Relative Humidity Sensor
Type of Sensor (Precipitation)
Millimetres per hour of Precipitation
Precipitation Units of Measure (Millimetres)
Name of Precipitation Sensor
Hex Checksum
End of message termination
NMEA GPS Protocol Header
UTC Time, hhmmss.sss
Latitude ddmm.mmmm
North/South Indicator
Longitude ddmm.mmmm
East/West indicator
Position Fix Indicator (See below)
Satellites being used (Range 0-12)
Horizontal Dilution of Precision
Mean Sea Level (NSL) Altitude in metres
MSL Units, metres
Geoid Separation and Units in metres
Differential GPS Reference Station ID
Checksum
End of message termination
Page 104 Issue 3
May 2018