Twisted Hobbys Crack Turbo Beaver Manual page 20

Repeat the process with the Rudder
Horn.
For mild control throws, install the
horn so that it is flush with the near
side as shown, or the underside of the
wing.
Rev: 2013.09.15.v004a
Make sure that the contour of the horn
matches up with the inside of the hinge
for proper horn alignment.
For Wild and 3D control throws, install
the horn so that it is flush with the far
side as shown, or the top of the wing.
The two remaining horns are for the
ailerons. They will be installed from the
underside of the wing.
Test fit the elevator and rudder
together. These two pieces will be glued
together BEFORE attaching to the
fuselage.
20