Table of Contents
Advertisement
Remove the webbing from the spar slot.
Spread the slot apart and test fit the
Rounding the ends of the spar will help
spar.
it slide into the slot a little easier.
Coat both sides of the spar with a
Install the spar into the wing slot, make
While the Wing is drying, install the
medium bead of Welders
sure you have a good solid bond
landing gear sturts to the fuselage
between the wing and spar. Weigh
halves as shown. Use the tack up
down or push pin down to work
method.
surface.
12
Rev: 2013.09.15.v004a
Advertisement
Table of Contents
Need help?
Do you have a question about the Crack Turbo Beaver and is the answer not in the manual?
Questions and answers