Table of Contents
Advertisement
When you select this function, the following message will appear
at the center of the screen to assist you in creating a password.
ENTER PASSWORD:
Type the password, up to eight characters in length, and press
<ENTER>. The password typed now will clear any previously
entered password from CMOS memory. You will be asked to
confirm the password. Type the password again and press
<ENTER>. You may also press <ESC> to abort the selection and
not enter a password.
To disable a password, just press <ENTER> when you are
prompted to enter the password. A message will confirm the
password will be disabled. Once the password is disabled, the
system will boot and you can enter the utility freely.
PASSWORD
When a password has been enabled, you will be prompted to enter
it every time you try to enter the setup utility. This prevents
unauthorized use of the utility on your computer.
Chapter 3 Award BIOS Setup
57
Advertisement
Table of Contents
