Aaeon SBC-598 Manual page 54

Power Management
Power management lets you set up your computer to save
electricity when it is not actively in use by putting the system into
progressively greater power saving modes. In the power manage-
ment scheme there are four system states which proceed in the
following sequence:
Normal
There are four selections for Power Management (PM):
Disabled
Max Saving
Min Saving
User Defined
With the exception of Disabled, three of the above selections
have "fixed-mode" settings. Therefore, when PM is set to
Disabled, some items which are predefined will become unmodi-
fiable.
PM Control by APM
When this is set to Yes, the Advanced Power Management feature
in Microsoft Windows controls power management operation.
The default setting is No.
Video Off Option
User can select 4 different modes for turning off the video. The
modes are a function of the PM mode of the computer. The
choices are All Modes Off, Always On, Suspend Off, and
Susp, Stby Off.
The table below summarizes the behavior of the monitor in
relation to the four PM modes.
46 SBC-598 User Manual
Doze Standby
Turns off PM
Maximized power saving by activating maxi-
mum power saving settings after one minute of
system inactivity.
Produces less power saving by activating
moderate power saving settings after one hour
of system inactivity.
You set the power saving options manually.
Suspend