Table of Contents
Advertisement
IR Address Select
The address of the IR port can be changed from Disabled, 2E8H,
3E8H, 2F8H, to 3F8H.
IR Mode
The IR mode can be either set to HPSIR or ASKSIR.
IR IRQ Select
The user can manually set the IRQ of the IR port.
Onboard Parallel Port
Sets the I/O address for the onboard parallel port. The setting
options are:
378/IRQ7 (default)
Disabled
278/IRQ5
3BC/IRQ7
Parallel Port Mode
Selects the parallel port mode. The setting options are:
SPP
ECP+EPP
EPP
ECP
If you set this option to SPP or EPP, the "ECP Mode Use DMA"
option will not appear on the screen. If you set this option to SPP
or ECP, the "Parallel Port EPP Type" option will not appear on the
screen.
ECP Mode Use DMA
Selects the ECP Mode DMA channel. The setting options are:
3
1
Note: that this option does not appear if the "Onboard Parallel
Mode" is set to SPP or EPP.
Chapter 3 Award BIOS Setup
55
Advertisement
Table of Contents
