Sockets - Aaeon SBC-598 Manual

Warning! Always completely disconnect the power cord from
Caution!
Conflicts! The VGA controller of SBC-598 uses IDSEL No.
The SBC-598 CPU card supports most Pentiums and Pentium-
compatible CPUs. The system's performance depends on the CPU
you choose. You can install or upgrade the CPU in the board's
Intel Socket 7 socket by following the procedures outlined below. If
your system has an existing CPU, you need to remove it before
installing the new CPU.
8 SBC-598 User Manual
your chassis whenever you are working on it. Do
not make connections while the power is on
because sensitive electronic components can be
damaged by the sudden rush of power. Only
experienced electronics personnel should open
the PC chassis.
Always ground yourself to remove any static
charge before touching the CPU card. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at all
times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis.
31, which is the same as that of the first PCI slot
(i.e., "PCI1") on the PCI backplane (PICMG 2.0
standard). Therefore, when the onboard VGA
function is enabled, the first PCI slot on the PCI
backplane cannot have a peripheral card plugged
in otherwise hardware conflicts can result.