ACME LED-BL4B User Manual page 9

Stage blinder b4

Table of Contents

automatically. Back to the previous functions without any change press the MENU button.

Channel Mode

Select the

, press the ENTER button. Use the DOWN and UP button to select the

channel mode (1/ 2/4/5CH)( 1 channel mode control bright of 4 LED, 2 channel mode means

1st channel mode control bright of 4 LED , 2

mode control bright of 4 LED by separate, 5 channel mode control bright of 4 LED by

separate, and 5

channel control effect of 4 LED ). Once selected, press the ENTER button to

setup or exit menu mode without any change after 8 seconds automatically. To go back to the

functions without any change,pls press the MENU button

Master/Slave Mode

Select the

, press the ENTER button. Use the DOWN and UP button to select

(Master) 、

group, SL00, SL01 as another group.）, after selected, press the ENTER button. Or exit menu

mode without any change after 8 seconds automatically. To go back to the functions without

any change press the MENU button.

Sensitivity

Select the

,press the ENTER button. Use the DOWN and UP button to select the

sensitivity (000-100). Once selected, press the ENTER button to setup or exit menu mode

without any change after 8 seconds automatically. To go back to the functions without any

change press the MENU button

LED display

Select the

, press the ENTER button. Use the DOWN and UP button to select

(LED display on) or

（Slave）（Note: Each 2 units as one group, such as MAST, SL01 as one

(LED display off, after 30 sec. without any move, display will off

channel control effect of 4 LED, 4 channel

Table of Contents

Troubleshooting