ACME LED-BL4B User Manual page 10

Stage blinder b4

Table of Contents

again). Once selected, press the ENTER button to setup or exit menu mode without any

change after 8 seconds automatically. Back to the functions without any change press the

MENU button again.

Display direction

Select the

, press the ENTER button. Use the DOWN and UP button to select

(positive display) or

setup or exit menu mode without any change after 8 seconds automatically. Back to the

functions without any change press the MENU button again.

Blackout Mode

Select the

, press the ENTER button. Use the DOWN and UP button to select

(when without DMX signal, the output will be "0") or

master will run the built-in CHASE ,and the slave will keep the same running status ). Once

selected, press the ENTER button to setup or exit menu mode without any change after 8

seconds automatically. Back to the functions without any change press the MENU button

again.

Temperature Display

Select the

, press ENTER button and the display will show the temperature of each

unit

，

Firmware version

Select the

, press ENTER button and the display will show the version of software of the

unit. To go back to the functions press the MENU button.

(reverse display). Once selected, press the ENTER button to

. To go back to the functions press the MENU button.

(when without DMX signal, the

Table of Contents

Troubleshooting