Table of Contents
Advertisement
DO'S
AND DON'TS
DO'S AND DON'TS
WHEN ADDING TONER
WARNING:
Do not incinerate
toner
or toner
containers.
Toner dust may ignite
when exposed
to open flame.
[ WARNING:
Dispose
of the used toner
cartridge
according
to your local
Cl When adding toner, follow the instructions
on the touch panel display.
IJ Do not turn off the main switch.
If you do, your copy settings
are cleared.
WHEN REMOVING MISFED PAPER
WARNING:
Since
some parts
of the copier
are supplied
with high electrical
voltage,
touch
only
the parts
specified
in the instructions
inside
the
machine
door.
I
WARNING;
When removing
misfed
paper
from section
"D",
use caution.
The
fusina
unit mav be verv hot.
I
Cl When removing
misfed paper, follow the instructions
on the touch panel display.
IJ Do not turn off the main switch.
If you do, your copy settings
are cleared.
Cl Do not leave any torn scraps within the machine.
D After removing
misfed paper, make sure that all units and levers are returned to their original
positions
and that all covers are closed.
O When removing
misfed paper from the dual job feeder, open the cover of the feed-in
unit.
GENERAL OPERATION
D In the Staple mode, do not use paper that is curled or has low stiffness.
D When
ou use the bypass feed tray while placing the original directl
on the exposure
glass,
K
i
lower t e platen cover, dual job feeder,
or recirculating
document
andler before pressing
the Start key.
Advertisement
Table of Contents
