Table of Contents
Advertisement
BASIC FUNCTIONS AND KEY TOPS
w
Program
t>
v
You can store up to 5 frequently
used copy job settings
in machine
memory,
and recall them
for future use.
O
You
can select the Program N0,5 as a default setting using
the User Tool 5. See page 16.
Entering
a program
1.
Set the copy settings you want to put into memory.
2.
Press the Program
key.
3.
Follow the instructions
on the touch panel display.
Recalling
a program
1.
Press the Program
key.
2.
Follow the instructions
on the touch panel display.
Interrupt
a
~
-J
Press to interrupt
a multicopy
run to make urgently needed copies.
The interrupted
copy job
settings are stored in the machine's
memory.
After interrupt copying
is completed,
press this
key again to recall the previous
copy job settings.
Auto Start Mode
When you press the Start key during warm-up,
copying will start automatically
after warm-up
is completed.
The Start key blinks in red and green alternately
in this mode.
42
Advertisement
Table of Contents
