Table of Contents
Advertisement
User Tools
CHANGING DEFAULT SETTINGS
~[
Change fixed R/E
This
copier
has 10 fixed ratios (4 enlargements
and 6 reductions).
You can change
these
fixed reproduction
ratios to different
ratios.
n
7
Set standard
tray display
Paper Tray Priority
When Auto Paper Select is canceled,
the 1st tray is selected
as a default setting.
You can cancel this setting and select
the other tray as a default setting.
~ default:
OFF
Auto
Paper Select
As a default setting, the Auto Paper Select is selected.
You
Priority
can cancel this setting,
Cl default:
Yes
Paper Tray Display
in APS mode
In
the default setting, the tray display is shown only when the
Auto Paper Select mode is canceled.
You can cancel this
setting and have the tray display shown always.
~
default:
No
Auto Tray Switching
If you load paper of the same size and in the same direction
in two or more paper trays, the machine
automatically
shifts
to another tra
when the tray in use runs out of paper.
J
Cl default:
es
Cl Bypass feed tray, and tra s for cover sheet and slip sheet
{
cannot be used for Auto
ray Switching.
~
Regarding User Tools No. 8, 9, 10, and 11, see the next page.
[ 12 I Select ARDF/RDH
modes
O This
user tool can be used only when your machine is equipped with the dual job feeder (system A and B) or
the recirculating document handler (system C).
Original
Count
Display
In the default settin
, you can see the entered
cop
quantity
?
t
on the upper part o the copy counter
and the num
er of
copies made on the lower part.
You can cancel this setting
and see the number of originals
to be fed on the lower part
of the cop
counter.
On the upper
art, you can see the
?
r
number o copies made.
To cance
the default setting,
select
"Yes".
I ~
default:
No
Auto
Paper
Select
I
In the default setting, the Auto Paper Select is not selected
when you set originals
in the dual job feeder or recirculating
document
handler.
You can cancel this setting.
~
default:
No
Thin Paper
mode
(for machine with dual job
feeder
only)
(system A or B)
Use when changing
the type of originals
to be fed.
Select
this function
when you use thin originals
(lighter than 53
g/mz, 14 lb).
Cl default:
No
17
Advertisement
Table of Contents
