Table of Contents
Advertisement
Copier Environment
INSTALLATION REQUIREMENTS
INSTALLATION
REQUIREMENTS
Copier Environment
The installation
location should be carefully chosen because environmental
conditions
greatly
affect the performance
of a copier.
- Optimum
environment
conditions
-
tJ Temperature:
10- 30"C (50 - 86°F)
Cl Humidity:
15- 90?40
D A strong and level base.
0 The copier must be level within 5 mm (0.2") both front to rear and left to right.
D To avoid possible
build-up of ozone, make sure to locate this copier in a large well ventilated
room which has air turnover
of more than 30ms/hr/person.
Environments
To Avoid
D Locations
exposed
to direct sunlight
or strong light (more than 1,500 Iux).
D Locations
directly
exposed
to cool
air from
an air conditioner
or heated
air from
a
heater. (Sudden
temperature
changes
may cause condensation
within the copier.)
D Places where the copier may be subjected
to frequent
strong vibration.
C! Dusty areas.
Cl Areas with corrosive
gases.
~ Places higher than 2,000 m
(6,500
ft)
above sea level.
.,.
Ill
Advertisement
Table of Contents
