Table of Contents
Advertisement
FUNCTIONS ON OPERATION SCREENS
Cover/Slip Sheet (Paper Designate)
The Paper Designate
function
can be used only when your machine
is equipped
with the dual job feeder
(system A or B), or the recirculating
document
handler
(system
C).
Before
using this function,
please
refer to pages
4 and 5 to know which system
you have because
this
function
is different
depending
on the system
you have.
System
A and B (with
dual job feeder)
After selecting
this function,
you have to select the Autocount
key or the Number
keys key
to input the number
of originals.
System
C (with
recirculating
document
handler)
After selecting this function,
the machine starts counting the number of originals
automatically.
13 When using the Paper Designate function, you should set the tray for slip sheets using the User Tool 2. See
page 15.
D You can also select the bypass feed tray for slip sheets. In this case, make sure to set paper for slip sheets
that are identical in size and direction with the paper to which you are copying, because the machine cannot
detect the length of paper set in the bypass feed tray.
O Two paper trays of identical size and direction are required for this function.
Designated
originals
will be copied onto slip sheets fed from the tray set by User Tool 2. Up
to 10 originals
can be designated.
62
Advertisement
Table of Contents
