Reading The Initialization Data Of An Image Plate - AGFA CR 10-X User Manual

54 | CR 10-X, CR 12-X, CR 15-X | Operating CR 10-X, CR 12-X and CR 15-X

Reading the Initialization Data of an Image Plate

The initialization data stored in the IP barcode can be read via the digitizer.
Reading the initialization data of an image plate can be necessary in case you
want to find a specific IP.
To read the initialization data:
1. Check that the system is ready for operation:
The status indicator on the digitizer constantly lights up in green.
2. Click on Read and Initialize Cassette (1) in the Functionality Overview
pane of the Main Menu window of the NX station.
The Read and Initialize Cassette pane (2) is opened in the middle section
of the Main Menu window:
For more information, refer to the NX Key User Manual, document 4421.
3. Click on the Read button at the NX workstation.
The digitizer waits for the cassette and the status indicator constantly
lights up in green.
4. Insert the cassette containing the image plate into the cassette slot of the
digitizer as shown below.
Make sure to insert the cassette with the black side (X-ray tube side) to the
top and with the shutter opening mechanism and the locking mechanism
inside the digitizer. Small cassettes must be pushed to the right side of the
slot.
2491E EN 20150409 1543
1 2