Step 1: Select A Patient And Start The Exam - AGFA CR 10-X User Manual

Step 1: Select a patient and start the exam

At the NX workstation:
1. Open the Worklist window of NX.
In the Worklist window, you can view and manage the exams that are
scheduled via the Worklist pane.
2. In the Worklist window, open a patient from the RIS or enter patient data
manually.
• To open a patient from the RIS, select an Exam from the list (1) and
click on Start Exam (2).
• To enter patient data manually, click New Exam (3) and enter patient
data and image data manually.
For more information, refer to the NX User Manual, document 4420.
Note: When starting the NX software, the Worklist window is
the first window that appears after the NX splash screen.
Note: Start the NX software on the NX station. Refer to the NX
User Manual, document 4420.
3 1
CR 10-X, CR 12-X, CR 15-X | Getting started | 41
2
2491E EN 20150409 1543