CR 10-X, CR 12-X, CR 15-X | Operating CR 10-X, CR 12-X and CR 15-X | 63
Cassette release button pressed before end of cycle
Details
Cause
Solution
The following error message is displayed in the Digitizer
Remote Display:
Do not press the cassette release button before end of cycle.
Please clamp the cassette again by pushing it towards the
digitizer. Restart the digitizer.
You pressed the cassette release button before the end of the
cycle.
Do not press the cassette release button before the end of the
cycle. If you did, clamp the cassette again by pushing it
towards the digitizer and restart the digitizer.
2491E EN 20150409 1543