Program/Change/Delete Ldap Server - Ricoh Aficio ISC 615G General Settings Manual

System Settings

Program/Change/Delete LDAP Server

This section explains how to program the LDAP server settings.
To program/change the LDAP server
A
2 Select [System Settings] using {U} or {T}, and then press the {OK} key.
B
Select [Administrator Tools] using {U} or {T}, and then press the {OK} key.
C
Select [Prog/Chnge/Del LDAP Server] using {U} or {T}, and then press the {OK}
key.
D
Select [Program/Change] using {U} or {T}, and then press the {OK} key.
E
Select the LDAP server you want to program or change using {U} or {T},
and then press the {OK} key.
When programming the server, select [*Not Programmed].
F
Set each item as necessary.
74