Connecting the Machine
Settings Required to Use Network TWAIN Scanner
This section lists the settings required for using TWAIN Scanner under the net-
work environment.
1
Ethernet
This section lists the settings required for using network TWAIN Scanner with
Ethernet cable.
For details about how to specify the settings, see "Interface Setting".
Menu
Interface Setting/Network Machine IPv4 Address
Interface Setting/Network IPv4 Gateway Address
Interface Setting/Network DNS Configuration
Interface Setting/Network DDNS Configuration
Interface Setting/Network Domain
Interface Setting/Network WINS Configuration
Interface Setting/Network Effective Protocol
Interface Setting/Network LAN Type
Interface Setting/Network Ethernet Speed
Interface Setting/Network Permit SNMPv3 Communictn.
Interface Setting/Network Permit SSL/TLS Comm.
Interface Setting/Network Host Name
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Effec-
tive].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed.
When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se-
lected interface takes precedence.
Reference
p.54 "Interface Settings"
32
User Tool
Setting Requirements
Necessary
As required
As required
As required
As required
As required
Necessary
Necessary
As required
As required
As required
As required