Settings Required To Use Scan To Folder Function - Ricoh Aficio ISC 615G General Settings Manual

Connecting the Machine
Menu
File Transfer Setting
File Transfer Setting
1
File Transfer Setting
File Transfer Setting
File Transfer Setting
File Transfer Setting
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Effec-
tive].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If
both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒ When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3/IMAP4 Settings].
❒ When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port].
Reference
p.54 "Interface Settings"
p.63 "File Transfer"

Settings Required to Use Scan to Folder Function

This section lists the settings required for sending file.
Ethernet
This section lists the settings required for sending file with ethernet cable.
For details about how to specify the settings, see "Interface Setting" and "File
Transfer".
Menu
Interface Setting/Network Machine IPv4 Address
Interface Setting/Network IPv4 Gateway Address
Interface Setting/Network DNS Configuration
Interface Setting/Network DDNS Configuration
Interface Setting/Network Domain
Interface Setting/Network WINS Configuration
Interface Setting/Network Effective Protocol
Interface Setting/Network LAN Type
26
User Tool
Reception Protocol
POP3/IMAP4 Settings
Key Operator's E-mail Add.
E-mail Communication Port
Scanner Resend Time
Scanner Resend Setting
User Tool
Setting Requirements
As required
As required
As required
As required
As required
As required
Setting Requirements
Necessary
Necessary
As required
As required
As required
As required
Necessary
Necessary