This chapter describes user tools in the System Settings menu.
General Features
This section describes the user tools in the General Features menu under System
Settings.
❖ Prog/Change/Del User Text
You can register text phrases you often use when specifying settings, such as
".com" and "Regards".
You can register up to 40 entries.
• Program/Change
• Delete
Select [System Settings] using {U} or {T}, and then press the {OK} key.
A
Select [General Features] using {U} or {T}, and then press the {OK} key.
B
Select [Prog/Change/Del User Text] using {U} or {T}, and then press the {OK}
C
key.
Select [Program/Change] to program/change text phrases using {U} or {T},
D
and then press the {OK} key. To delete programmed text phrases, select
[Delete] using {U} or {T}, and then press the {OK} key.
Select [*Not Programmed] using {U} or {T}, and then press the {OK} key.
E
To change or to delete programmed text phrases, select the text phrases
you want to change/delete.
Enter the text phrases you want to program, and then press the {OK} key.
F
Press the {User Tools/Counter} key.
G
❖ Panel Key Sound
The beeper (Key tone) sounds when a key is pressed.
• On
• Off
❖ Warm-up Beeper (copier)
You can have the beeper sound when the machine becomes ready to copy af-
ter leaving Energy Saver mode, or when the power is turned on.
• On
• Off
2. System Settings
45