Status Monitor Description - Cisco GS7000 Installation And Operation Manual

Gainmaker node seg2way status monitor/local control module

Hide thumbs Also See for GS7000:

Table of Contents

The local control module can be upgraded to a status monitor through the addition

of a transponder core module. The transponder core module plugs directly onto the

local control module's PWB. The mechanical housing for the status monitor and the

local control module are the same.

Note: The Heart Beat, Receive, and Error indicator LEDs are only present if the

transponder module is installed.

Status Monitor Description

The status monitor is HMS compliant and provides node monitoring and control

capability at the cable plants headend. The following node voltages and signals are

monitored and their status reported to the headend by the status monitor.

Receiver optical input level (all receivers)

Transmitter optical output level (all transmitters)

4022871 Rev C

Status Monitor/Local Control Module Description

Table of Contents