Cisco 1000Base-T Sfp Modules; Cwdm Gbic Module And Sfp Module Description And Information - Cisco WS-G5484 Installation And Specification Manual

3. You can have a maximum of 12 1000BASE-ZX GBIC modules or SFP modules per system to comply with EN55022 Class B and 24 1000BASE-ZX
GBIC modules or SFP modules per system to comply with FCC Class A regulations.
4. Dispersion-shifted single-mode fiber-optic cable.
The 1000BASE-ZX GBIC module and SFP modules provide an optical power budget of 21.5 dB. You
Note
should measure your cable plant with an optical loss test set to verify that the optical loss of the cable
plant (including connectors and splices) is less than or equal to 21.5 dB. The optical loss measurement
must be performed with a 1550-nm light source.

Cisco 1000BASE-T SFP Modules

The 1000BASE-T (GLC-T) SFP module is compliant with IEEE 802.3:2000 and plugs into a standard
Gigabit Ethernet SFP module port. It operates on standard Category 5 wiring and has an RJ-45
connector.
See your router installation and configuration guide to determine which routers support the GLC-T SFP
module.
Table 7
Specification
Dimensions (H x W x D)
Cabling Distance (maximum)
Power consumption
Product number
CWDM GBIC Module and SFP Module Description and
Information
Coarse Wavelength-Division Multiplexing (CWDM) GBIC modules and Coarse Wavelength-Division
Multiplexing (CWDM) SFP modules are supported on a variety of Cisco products. For more
information, see the
Wavelength-Division Multiplexing SFP Compatibility
Gigabit Interface Converter (GBIC) Module and Small Form-Factor Pluggable (SFP) GBIC Module Installation Information and Specifications
OL-5067-08
GLC-T SFP Module Specifications
Cisco CWDM GBIC Compatibility Matrix
Cisco 1000BASE-T SFP Modules
Description
.055 in. x .054 in. x 2.8 in (14.0 mm. x 13.7 mm.
x 71.1 mm)
328 feet (100 m)
1.1W
GLC-T=
and the Cisco Coarse
Matrix.
9