Cisco GS7000 Installation And Operation Manual page 41

Starting the Configuration Wizard
The Configuration Wizard is accessed from the CheetahNet System Manager. It can
be started in three different modes; Add Device, Add Similar Device, or Edit Device.
You can use any one of the modes to start the application since you can modify filter
settings and perform other desired tasks afterwards.
Perform the following steps to start the Configuration Wizard in Add Device mode.
1 Start the System Manager.
Result: The System Manager main screen displays.
2 On the System Manager menu bar, select Request - Add Network Element - All
Other Device Types.
Result: The Configuration Wizard main screen displays.
Menu Bar
Toolbar
Filter
Settings
Configuration
Status Box
Resource
List
Activity Log
Status Bar
4022871 Rev C
Status Monitor Configuration Procedure
27