Install Turret Dome Camera; What's Included; Install Camera - Uniden 4KTPD-MVF Installation Manual

5. Connect the network cable tail to the house cabling through the
1" hole.
When using an optional external power supply, the AC
socket outlet shall be installed near the equipment and be
If installed outdoors, the cable and all cable connections
must be routed inside the wall.
6. Unscrew the hatch on the camera to insert an SD card if
needed.
7. Remove the dessicant packet from the sealed plastic envelope
and position it inside the camera.
8. Reassemble the camera, sleeve, and ring. Position the assembly onto the base and adjust
the camera to the correct viewing angle.
As you adjust the camera position, check it through the NVR Preview screen.
9. When the viewing angle is correct, tighten the ring to the base.
As you tighten the ring, keep adjusting the camera as needed.

INSTALL TURRET DOME CAMERA

What's Included

• IP camera
• Mounting template sticker
• Star-tipped Allen wrench
• 2-wire to 2.1mm barrell plug for optional 12V DC power input
• Installation screws and anchors
• Dessicant package

Install Camera

1. Remove the camera and installation items from the box. Verify that all parts are there.
10
easily accessible.
Red - 12VDC (optional)
2.1mm Barrel Adapter
NOTE: 12VDC power supply
not included
RJ45
PoE