PARTS OF THE LIGHTCAM 40HD
LEDs (6)
Lens
IR
Light
INSTALL THE CAMERA
Install the LightCam 40HD in a verticle (from the ceiling or eaves)
or horizontal (against a wall) position. Installation instructions are
identical for either position.
CONSIDERATIONS
If there is no junction box for wiring in the location where you
x
want to install this camera, you must add a junction box.
Do not install the camera where the sun will shine directly into
x
the lens.
PROCEDURES
1.
Turn off power to the junction box where the camera will be
located.
Antenna
Adjustment
Ambient Light
Screw
Sensor
Motion Sensor
-
Adjustment
Collar
Status
Indicator
LED
-
6
Screw
Locations