Page 1
Wireless APP Camera Installation and Operating Instructions Model: APPCAM25HD Version 1.1 PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT AND KEEP THIS MANUAL FOR FUTURE REFERENCE.
Page 2
disconnect to the WAPP camera. • By adjusting to “Better Streaming” in the system setting section may improve the WAPP APP performance. 1.5GHz dual core processor or equivalent is suggested. • • • • • CLASS10...
CONTENTS INTRODUCTION ....................2 WIRELESS DEVICES OPERATING RANGE ............2 IMPORTANT SAFETY PRECAUTIONS..............2 KIT CONTENT ................................. 5 NIGHT VISION ......................6 CAMERA INSTALLATION ..................6 CAMERA OVERVIEW ..................7 DOWNLOAD AND SETUP THE APP ............... 8 ............11 VIEWING YOUR SNAPSHOTS ..............12 PLAYBACK YOUR VIDEOS................
INTRODUCTION WIRELESS DEVICES OPERATING RANGE reception so may is a storm or the reach of infants. in operation.
Page 5
w i t h this of the interference that may cause these • • • suggestions. • The operating distance between user and products include its antenna must be no less than 20cm.
CAMERA OVERVIEW Antenna Infrared LEDs Signal Indicator Power Indicator Motion Sensor Camera Stand SMA Connector RJ-45 Connector Memory Card Slot Power Cable / Reset Button...
TROUBLE SHOOTING SOLUTION • Make sure your network supports the DHCP camera connect to the • setting. • • • Wi-Fi router is not shown • Wi-Fi router manufacturer for the settings if necessary. Wi-Fi router into • WPA/WPA2/WPA2-PSK. is not Note: No image appears •...
Page 30
• • • • • working • • Bright white spots appear • at night time Note: • • proper operation. • Note:...
Page 32
Network Connection 3 concurrent sessions Security Camera Parameter Image Sensor Antenna Housing IP66 6 IR LEDs with IR switcher Video Audio Parameter Image Compression H.264 Supported Mobile Device General Parameter Operating Temperature -10°~+50°C...
STORAGE MEDIA MANAGEMENT HD / Better Image Better Streaming...
Page 34
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.